Before you begin, please make sure you have the following:
- Access to the Hydra charger’s configuration settings (typically accessed via the charger's interactive touchscreen)
- Administrative credentials (The charger's touchscreen is password protected. If you don't know the password, please contact Hydra support)
- Internet connection for the charger
- Charger must support OCPP 1.6 JSON
- On the charger's touchscreen, navigate to 'Settings' followed by the 'URL' tab
- Enter the Fuuse URL: ws://hw.fuuse.io:9998
- Press 'OK'
- You may need to wait a few minutes for the charger to appear in Fuuse
- If the charger does not appear in Fuuse, try and reboot the charger or turn off for 10 seconds and turn on again.