You must create a location before adding your charger to Fuuse. 

Location setup in Fuuse can be completed using one of two flows, based on the level of information available at the time of setup.

Option 1: Quick Set Up (this can take up to 3 minutes)

1. Navigate to https://app.fuuse.io/and from your main dashboard, click on the Network dropdown

2. Followed by Locations

3. Click on the New Location → Add Manually

4. Select Quick Setup & Start

5. Fill in the required fields: Location Name, Address Line 1, Town and Postcode then click on Recentre Map

6. Click Save Location

Option 2: Advanced Setup (this can take up to 15 minutes)

1. Navigate to https://app.fuuse.io/and from your main dashboard, click on the Network dropdown

2. Followed by Locations

3. Click New Location → Add Manually

4. Select Advanced Setup & Start

5. Fill in the Location Name, Address Line 1, Town and Postcode then click on Recentre Map - there are other non compulsory fields you can fill in that provide additional information to drivers about the site.

6. Click Next Step

7. Adjust the Available Hours if necessary, please note that is for information purposes only.

8. If your chargers are intended for public use, ensure that Make Site Visible to the Public is enabled. This allows your site information to be shared with roaming partners such as ZapMap. 

9. Click Next Step

10. You will notice the Single Fixed Energy Cost button is automatically ticked on the Location Energy step. You can change this in line with the site’s electricity tariff cost. If you don’t need to make any changes, you can simply select “Next Step”. Note: This is not the charging tariff drivers pay. It is used to calculate how much it costs the site to supply energy to the chargers for each completed charging session.

11. Click Save Location